Generac 5819 Wet Cell Battery fits Generac Standby's 6,000watts to 60Kw 26R
- Use with all Generac air-cooled and liquid-cooled units 60kW and below (except QT4842)
- Offers reliable and quick starts even in the coldest weather
This is the standard "required" battery for any Generac air-cooled standby and liquid-cooled standby generators 60 kW and below (except the QT4842). Be prepared for the worst with this original (bought from Generac) battery. Required with ALL Generac LP/NatGas Standby's sold in the past two yearsIt does not come included when you purchase your new Generac generator. They can be very difficult to find also.
Nothing lasts forever, not even the battery on your Generac Generator. When that time comes, don't be left in the dark, get the 5819 Wet Cell Generac Replacement Battery. This battery can be used with all Generac air-cooled standby and liquid-cooled standby generators 60 kW and below (except the QT4842). Be prepared for the worst with this replacement battery. Required with ALL Generac LP/NatGas Standby's sold in the past two years
We ship these wrapped in plastic and some condensation and overflow due to expansion during transit may occur. These are not considered defects or shipping damage unless there is physical damage as well. If there is wetness, carefully rinse with tap water and dry with paper towels. Try not to splash on your clothes (as I can attest, my jeans look like they took a few BB's) or skin (also rinse off quickly) My advice is to use latex gloves to handle.
The 5819 includes:
- One (1) Generac 26R Wet Cell Battery (5819)
- Battery: 8.7" x 6.8" x 7.6"
- Shipping Dimensions: 9" x 7.3" x 8.7"
- Weight: 30 pounds
- Cold Cranking Amps: 525