.
.
.
DAYS
HOURS
MINUTES
SECONDS
 

Pony

417 North Ashland Ave

Chicago, IL 60622

Phone: 312-666-0640

Fax: 312-666-2723

Pony Clamps and Vises Logo
You're currently browsing our

Pony Clamps and Vises

department
Pony  C-Clamps *ALL*
Pony Clamps and Vises Logo

Pony C-Clamps *ALL*

  • Iron frame with steel screw and swivels
  • Sliding pin handle for precise tightening and easy loosening
  • Durable powder coated finish
From $1.07
View Item
Pony  Spring Clamps *ALL*
Pony Clamps and Vises Logo

Pony Spring Clamps *ALL*

  • Ideal clamp for when light pressure is adequate and when speedy application and removal are important
  • Nickel-plated steel jaws
  • Heavy-duty tempered-steel springs
From $0.98
View Item
Pony 13025 Portable Light Duty Clamp-On Vise
Pony Clamps and Vises Logo

Pony 13025 2-1/2'' Portable Light Duty Clamp-On Vise

  • Mounts on any work table up to 2 inches thick
  • Plated steel hardware increases longevity
  • Sliding pin handles allow for easy tightening and loosening jaw and grip and worktable grip
$24.80
View Item
Special for this item!
Pony 1623 Hold Down Clamp
Pony Clamps and Vises Logo

Pony 1623 3" Hold Down Clamp

  • Hold-down clamps are designed for bench-top and machine-table "surface" clamping
  • otates 360° around the holding bolt
  • When not in use the clamp slides off the bolt and the bolt drops below the surface leaving the work area clear of all obstructions
$22.95
View Item
Special for this item!
Pony 29055 Multipurpose Pony Bench Vise
Pony Clamps and Vises Logo

Pony 29055 5'' Multipurpose Pony Bench Vise

  • Perfect for heavy duty home, shop and professional use
  • Hardened-steel serrated jaws maintain a firm grip and can rotate a full 360 degrees
  • 5" jaw width and 3-3/8" opening capacity
$109.00
View Item
Special for this item!
Pony 29058 Drill Press Vise
Pony Clamps and Vises Logo

Pony 29058 4" Drill Press Vise

  • Mounts to any drill press
  • 4" opening capacity, 4" jaw width, 1/2" throat depth
  • Malleable cast iron with orange powered coated finish
$24.95
View Item
Special for this item!
Pony 30105 Quick Release Bench Vise
Pony Clamps and Vises Logo

Pony 30105 5" Quick Release Bench Vise

  • New Patented Quick-Release Jaw
  • Steel Replaceable Pipe Jaws
  • Heavy-Duty Rugged Design for the toughest applications
$99.99
View Item
Special for this item!
Pony 50 3/4" Pipe Clamp
Pony Clamps and Vises Logo

Pony 50 2 Pk 3/4" Pipe Clamp

  • The original Pony style clamp
  • Add 3/4" prethreaded end pipe to make any length you need.
  • Ideal for metalworking, woodworking and frame assembly
$33.95
View Item
Special for this item!
Pony 50 3/4" Pipe Clamp
Pony Clamps and Vises Logo

Pony 50 6 Pk 3/4" Pipe Clamp

  • The original Pony style clamp
  • Add 3/4" prethreaded end pipe to make any length you need.
  • Ideal for metalworking, woodworking and frame assembly
$79.95
View Item
Special for this item!
Pony 50 Pipe Clamp
Pony Clamps and Vises Logo

Pony 50 3/4" Pipe Clamp

  • The original Pony style clamp
  • Add 3/4" prethreaded end pipe to make any length you need.
  • Ideal for metalworking, woodworking and frame assembly
$19.95
View Item
Special for this item!
Pony 52 1/2" Pipe Clamp
Pony Clamps and Vises Logo

Pony 52 2 Pk 1/2" Pipe Clamp

  • The original Pony style clamp
  • Add 1/2" prethreaded end pipe to make any length you need
  • Ideal for metalworking, woodworking and frame assembly
$24.95
View Item
Special for this item!
Pony 52 1/2" Pipe Clamp
Pony Clamps and Vises Logo

Pony 52 12 Pk 1/2" Pipe Clamp

  • The original Pony style clamp
  • Add 1/2" prethreaded end pipe to make any length you need
  • Ideal for metalworking, woodworking and frame assembly
$119.95
View Item
Special for this item!
Pony 52 Pipe Clamp
Pony Clamps and Vises Logo

Pony 52 6 Pk Pipe Clamp

  • The original Pony style clamp
  • Add 1/2" prethreaded end pipe to make any length you need
  • Ideal for metalworking, woodworking and frame assembly
$65.95
View Item
Special for this item!
Pony 52 Pipe Clamp
Pony Clamps and Vises Logo

Pony 52 1/2" Pipe Clamp

  • The original Pony style clamp
  • Add 1/2" prethreaded end pipe to make any length you need
  • Ideal for metalworking, woodworking and frame assembly
$10.62
View Item
Pony 55 3/4" Pro Pipe Clamp Fixture Jorgensen
Pony Clamps and Vises Logo

Pony 55 2 Pk 3/4" Pro Pipe Clamp Fixture Jorgensen for 3/4" Pipe

  • 3/4" pony pipe clamp fixture
  • Mounts on any 3/4" pipe; features crank-type handle and 1-3/4" square clamp faces
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches
$29.95
View Item
Special for this item!
Pony 55 3/4" Pro Pipe Clamp Fixture Jorgensen
Pony Clamps and Vises Logo

Pony 55 4 Pk 3/4" Pro Pipe Clamp Fixture Jorgensen for 3/4" Pipe

  • 3/4" pony pipe clamp fixture
  • Mounts on any 3/4" pipe; features crank-type handle and 1-3/4" square clamp faces
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches
$54.95
View Item
Special for this item!
Pony 55 Pro Pipe Clamp Fixture Jorgensen
Pony Clamps and Vises Logo

Pony 55 3/4" Pro Pipe Clamp Fixture Jorgensen for 3/4" Pipe

  • 3/4" pony pipe clamp fixture
  • Mounts on any 3/4" pipe; features crank-type handle and 1-3/4" square clamp faces
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches
$22.40
View Item
Special for this item!
Pony 7437 Set of 8 Style 37 Bar Clamp Pads
Pony Clamps and Vises Logo

Pony 7437 2 Pk Set of 8 Style 37 Bar Clamp Pads

  • Work protecting bar clamp pad
  • Fits the 3700 series
  • 8 pieces will fit 4 clamps
$12.95
View Item
Special for this item!
Pony 7437 Style 37 Bar Clamp Pads Pony by Jorgensen
Pony Clamps and Vises Logo

Pony 7437 Set of 8 Style 37 Bar Clamp Pads Pony by Jorgensen

  • Work protecting bar clamp pad
  • Fits the 3700 series
  • 8 pieces will fit 4 clamps
$3.26
View Item
Pony 7437 of 8 Style 37 Bar Clamp Pads
Pony Clamps and Vises Logo

Pony 7437 6 Packs of 8 Style 37 Bar Clamp Pads

  • Work protecting bar clamp pad
  • Fits the 3700 series
  • 8 pieces will fit 4 clamps
$19.56
View Item
Special for this item!
Pony 7456 Protective Bar Clamp Replacement Pads
Pony Clamps and Vises Logo

Pony 7456 Set of 4 Protective Bar Clamp Replacement Pads

  • Fits the popular 7200 series I-Clamps and the model 50 clamp
  • 4 pieces is enough for 2 sets of clamps
  • Made of soft and durable plastic
$3.92
View Item
Pony 7456 Set of 4 Protective Bar Clamp Replacement Pads
Pony Clamps and Vises Logo

Pony 7456 2 Pk Set of 4 Protective Bar Clamp Replacement Pads

  • Fits the popular 7200 series I-Clamps and the model 50 clamp
  • 4 pieces is enough for 2 sets of clamps
  • Made of soft and durable rubber
$12.95
View Item
Special for this item!
Pony 7456 Set of 4 Protective Bar Clamp Replacement Pads
Pony Clamps and Vises Logo

Pony 7456 6 Pk Set of 4 Protective Bar Clamp Replacement Pads

  • Fits the popular 7200 series I-Clamps and the model 50 clamp
  • 4 pieces is enough for 2 sets of clamps
  • Made of soft and durable rubber
$29.95
View Item
Special for this item!
Pony 8510BP "Cabinet Claw" Cabinet Clamp (12 Clamps total)
Pony Clamps and Vises Logo

Pony 8510BP 6x 2-Pk "Cabinet Claw" Cabinet Clamp (12 Clamps total)

  • 6x 2 pack of clamps, 12 clamps total
  • Made of high strength and lightweight aluminum
  • Protective felt pads protect surfaces
$285.00
View Item
Special for this item!
Pony 8510BP "Cabinet Claw" Cabinet Clamp (4 Clamps total)
Pony Clamps and Vises Logo

Pony 8510BP 2x 2-Pk "Cabinet Claw" Cabinet Clamp (4 Clamps total)

  • 2x 2 pack of clamps, 4 clamps total
  • Will install two stiles from 1-1/2" to 2" width and up to 1-1/2" thick
  • Made of high strength and lightweight aluminum
$105.95
View Item
Special for this item!
Pony 8510BP 2-pk "Cabinet Claw" Cabinet Clamp
Pony Clamps and Vises Logo

Pony 8510BP 2-pk "Cabinet Claw" Cabinet Clamp

  • Will install two stiles from 1-1/2" to 2" width and up to 1-1/2" thick
  • Made of high strength and lightweight aluminum
  • Protective felt pads protect surfaces
$59.95
View Item
Special for this item!
Pony 8540 Jorgensen Casework Claw
Pony Clamps and Vises Logo

Pony 8540 2 Pk Jorgensen Casework Claw

  • Designed exclusively for the Frameless Kitchen and Bath Cabinets
  • Die Cast magnesium which is stronger and lighter than Die Cast Aluminum along with the Rapid Acting Acme Screw allows for easy application and versatility
  • The clamp aligns in Two Directions as 90° with openings in the clamp to provide access to your work piece
$62.99
View Item
Special for this item!
Pony 9166 90° Corner Clamp
Pony Clamps and Vises Logo

Pony 9166 12 Pk 90° Corner Clamp

  • Ideal clamp for holding mitered joints firmly in place while gluing or nailing
  • Precision cast in aluminum with protective painted finish
  • Holds work up to 3" wide and leaves joint fully exposed for miter correction, doweling, gluing or nailing
$84.95
View Item
Special for this item!
Pony 9166 90° Corner Clamp
Pony Clamps and Vises Logo

Pony 9166 2 Pk 90° Corner Clamp

  • Ideal clamp for holding mitered joints firmly in place while gluing or nailing
  • Precision cast in aluminum with protective painted finish
  • Holds work up to 3" wide and leaves joint fully exposed for miter correction, doweling, gluing or nailing
$19.95
View Item
Special for this item!
Pony 9166 Corner Clamp
Pony Clamps and Vises Logo

Pony 9166 90° Corner Clamp

  • Ideal clamp for holding mitered joints firmly in place while gluing or nailing
  • Precision cast in aluminum with protective painted finish
  • Holds work up to 3" wide and leaves joint fully exposed for miter correction, doweling, gluing or nailing
$8.00
View Item
Pony 9166 Corner Clamp
Pony Clamps and Vises Logo

Pony 9166 6 Pk Corner Clamp

  • Ideal clamp for holding mitered joints firmly in place while gluing or nailing
  • Precision cast in aluminum with protective painted finish
  • Holds work up to 3" wide and leaves joint fully exposed for miter correction, doweling, gluing or nailing
$49.95
View Item
Special for this item!
Pony 9185 90 Deg. Angle Clamp
Pony Clamps and Vises Logo

Pony 9185 90 Deg. Angle Clamp

  • Perfect tool for miters, butt joints and t-joints
  • Oversize jaws provide generous clearance for gluing, doweling, framing and cabinet assembly
  • Back jaw swivels for clamping and squaring material of different thickness
$26.49
View Item
Special for this item!

View discontinued Pony Clamps and Vises

Top Sellers in This Category

Bill Me Later from Paypal


Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Blog ImageFacebook ImageTwitter Image


Tools-Plus.com Customer Comments
MADE IN USA Products